Resources · Outside · EMF
The invisible environment.
Wireless signals, cell towers, wiring and dirty electricity are a new layer in the environment we live in. Find the antennas near you, measure what’s in your home, and lower your exposure where it matters most: where you sleep.
Barefoot on the ground, inside the Earth’s native electric and magnetic fields.
Rubber soles, raised floors, and a dense layer of non-native EMFs: wireless, cell signals, dirty electricity.
Non-native EMFs that may drain our energy and disturb sleep and the nervous system.
Grounding, wired connections, quieter places.
Antennas near you
These free maps show cell towers and antennas. Look for spots farther from towers, and check the direction they face. Tower maps are crowd-sourced and not complete, and a tower on a map isn’t the same as exposure at your door, so your own meter readings outrank them.
OpenCelliD map CellMapper AntennaSearch (U.S.)
Known low-EMF region: the U.S. National Radio Quiet Zone, about 13,000 square miles around the Green Bank Observatory in West Virginia, where radio transmissions are tightly restricted.
Lower your exposure
At night
Put your Wi-Fi on a timer to switch off while you sleep. Phone in airplane mode, out of the bedroom.
In the bedroom
Sleep in the room farthest from the smart meter and the nearest tower. Keep chargers and devices away from the bed.
Wired over wireless
Use ethernet and wired headphones. Switch off Bluetooth and Wi-Fi on devices when you don’t need them.
Fewer smart devices
Smart speakers, bulbs and baby monitors transmit constantly. Choose wired or simple versions.
Get away from it
Spend time outdoors away from towers, ideally barefoot on natural ground.
Measure
A meter shows what’s really in your home. A building biologist can do a full assessment.
What to look for in EMF tools
Qualities, not brands, rated Best, Good, OK or Not good. The meters and tools I use are in Non-Native EMF Mitigation on the Health Marshall Approved Products page. Grounding products are rated on The field you live in.
Meters
You can’t change what you can’t measure. A meter shows where your exposure actually comes from, and whether a fix worked.
- BestRF meter (radio frequency)
Measures Wi-Fi, cell and Bluetooth signals. Start here.
- BestGaussmeter (magnetic fields)
Finds strong fields from wiring, breaker panels and motors, in mG.
- OK3-in-1 budget meter
Cheap and handy for spotting big sources, but less accurate.
- Not goodPhone “EMF meter” apps
Phone sensors can’t measure RF exposure.
Wired over wireless
Every device you plug in is one less transmitter in your home, and the biggest win usually costs the least.
- BestRouter timer plug
Switches Wi-Fi off overnight, automatically.
- BestEthernet adapter kit
Wired internet for laptops, tablets and phones.
- BestAir-tube headphones
Sound travels through hollow air tubes, not wires next to your head.
- GoodWired keyboard and mouse
An easy swap from Bluetooth.
Shielding
Shielding can help, but done wrong it can reflect signals and make things worse. Measure before and after, and use a professional for walls.
- GoodShielding window film
Reduces RF through windows that face a tower or meter.
- OKShielding bed canopy
Can lower RF while you sleep. Never take a phone inside it.
- OKShielding paint
For walls facing a source. Must be grounded by a professional.
- Not goodEMF-blocking stickers and pendants
No change shows up on a meter.
Dirty electricity
High-frequency noise riding on household wiring, from dimmers, chargers, LED drivers and solar inverters.
- BestBedroom circuit cut-off switch
An electrician fits a switch to turn bedroom circuits off at night.
- GoodDirty electricity meter
Shows mV readings outlet by outlet.
- OKPlug-in filters
Debated. Measure before and after to see if they help in your home.
For a full home assessment, find a building biologist through the Building Biology Institute. Education, not medical advice.